Carbon steel bars
-
Minimum Offer: 22500 € Minimum raise: 500 € Auction base: 22500 €+ 10% BP + 300 € CG VAT 22 %
-
Bid placing deadline: 20/04/202612:00CET
-
Auction opens: 21/04/202610:00CET
-
Closing date: 21/04/202612:00CET
- Experiment n°3 -44%
-
-
Category:
Other - No. of visits: 3649
-
Category:
Lot Description
Approximately 1,600 carbon steel bars with circular and square cross-sections (total weight approximately 78,000 kg)
See the PDF document Lot 3 in the documentation section to view the complete list of goods included in this lot.
Goods sold as a whole, not by size. Some quantities may differ. An on-site inspection is recommended.
SALES NOTES:
- The goods are located in Rivarolo C.se (Turin), Salassa (Turin), and Ozegna (Turin).
COLLECTION NOTES:
- Maximum expected collection time from the agreed date: 2 days.
Lot documentation
Sale documentation
Lot Details
- Closing date:21-04-2026 12:00:00
- VAT:22%
- Buyers Premium: 10% BP
- Management fees 300 €
- Payment: Read condition salles
- Inspection date: Upon appointment
- Payment method: Bank Transfer
- Collection:Within 30 days from the notice of call by email
Location
- Country:IT
Related searches
- Would you like to take a look at all court actions and bankruptcies in Piemonte?
Click on: Piemonte Court Actions - Would you like to take a look at all court actions and bankruptcies in the area of Torino?
Click on: Torino Court Actions
Related products
-
Add to WatchlistAuction 9719Lot 1
Lentek SHARCH cementation system
SALE FROM AN ACTIVE COMPANYLentek SHARCH 304830 VRT 20 AQ1 Carburizing PlantPlant suitable for carburizing carbonitriding and tempering in a controlled atmosphere Load dimensions 760 x 1220 x 760 mm Maximum operating temperature 1050 C Maximum gross load 1000 kg Radiant tube power 150 000 kcal h Tempering in a controlled atmosphere and oil consisting of a heating chamber and acooling chamber Year 2001A high alloy steel fan is positioned on the roof of the hot chamber to ensure uniform circulation of the protective atmosphere allowing a flow from top to bottom The lower part of the cooling chamber houses the oil quenching tank with a capacity of 7 100 liters The oil is heated by radiant tubes with an atmospheric burner with a power of 81 kW 70 000 kcal h complete with a pilot burner and a flame detection system controlled by amicroprocessor controller The oil is circulated in the quenching tank by two agitators Please note that the property is located in Vigodarzere PD Download the documents PDF from the lot documentation section
Metalworking -
Add to WatchlistAuction 9822Lot 1
Mazak Super Turbo x510 MKI Laser Cutting
SALE FROM AN ACTIVE COMPANYMazak Super Turbo x 510 MKII laser cutter 2 5 kW System in operation until December 2025 System complete with MAZAK automated loading unloading cell Complete overhaul lead screw and slides of the X axis performed in 2024 Regular MAZAK maintenance performed in October 2025 Cell and machine were decommissioned by MAZAK with the axes and optics locked for transport Transformer and refrigerator are included no exhaust fan Serial number 677159608 Approximately 80 000 hours 1500x3000
Metalworking -
Add to Watchlist-66%Auction 9422Lot 9
Air conditioning pipes
Lot consisting of air conditioning piping including approximately 40 meters of 5 8 coated copper pipe inventory item 125 asset 366 approximately 40 meters of 1 2 coated copper pipe asset 367 approximately 40 meters of 3 4 coated copper pipe asset 368 approximately 25 meters of 7 8 coated copper pipe asset 369 approximately 8 meters of 1 4 coated copper pipe asset 370 approximately 20 meters of 1 2 x 0 8 coated copper pipe asset 371 approximately 14 meters of 3 8 coated copper pipe asset 372 Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection van and pallet truck
Metalworking -
Add to Watchlist-66%Auction 9422Lot 8
Equipment for plant maintenance
Lot consisting of equipment for system maintenance such as Globus inverter welders Metabo and Wurth electric hammers hydraulic pipe wrenches and much more Consult the Lot 8 PDF document from the documentation section to view further details and the complete list of goods included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection van and pallet truck
Metalworking -
Add to Watchlist-66%Auction 9422Lot 7
System maintenance boxes
Lot consisting of system maintenance boxes including 3 boxes for electrical maintenance workers no 124 in the inventory asset 347 2 boxes for plumbing maintenance workers asset 348 1 box for refrigeration maintenance workers asset 349 4 extendable aluminum ladders asset 350 Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection van and pallet truck
Metalworking -
Add to Watchlist-66%Auction 9422Lot 6
Equipment for plant maintenance
Lot consisting of equipment for system maintenance such as Hitachi and Wurth electric drills Atlas electric hammers electrical testers and much more Consult the Lot 6 PDF document from the documentation section to view further details and the complete list of goods included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection van and pallet truck
Metalworking -
Add to Watchlist-66%Auction 9422Lot 2
Building equipment and accessories
Lot consisting of construction equipment and accessories such as welding machines hoists dies and much more Consult the Lot 2 PDF document from the documentation section to view further details and the complete list of goods included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection tractor and pallet truck
Metalworking -
Add to Watchlist-66%Auction 9422Lot 1
Components for air conditioning systems
Lot consisting of spare parts and accessories for air conditioning systems such as multisplit outdoor units air filters pressure gauges probes and much more Consult the Lot 1 PDF document from the documentation section to view further details and the complete list of goods included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 4 days it is recommended to have the following means for collection tractor and pallet truck
Metalworking -
Add to WatchlistAuction 9892Lot 1
Tunnel for washing household goods
Lot consisting of 1 household appliance washer disinfector 3 Arcos benchtop cleaners 1 resistance spot welder 2 metal cleaning and finishing machines 1 Mattei Blade 7 compressor with dryer 1 Ingresoll Rand MH11 compressor with storage tank 1 ITF sandblaster not working 1 ITF PP2SS sandblaster 2 pillar drills An on site inspection is recommended The successful bidder will be responsible for disposing of any waste COLLECTION NOTES Maximum expected collection time from the agreed upon date 7 days
Metalworking -
Add to WatchlistAuction 9888Lot 1
Bystronic Bystar 4400 Laser Cutting
SOLD FROM AN ACTIVE COMPANY Bystronic Bystar 4400 laser cutter year 2009 Download the documents PDF from the lot documentation section
Metalworking -
Add to WatchlistAuction 9911Lot 3
Coral Iperjet 44 fume and dust extraction system
SOLD FROM AN ACTIVE COMPANYCoral Iperjet 44 fixed mobile fume and dust extraction system380V2 2 kWYear 2009Equipped with SF4 6 economizer control unit 1 spare
Metalworking -
Add to Watchlist-66%Auction 9972Lot 1
Metalworking equipment
Lot consisting of systems machinery equipment vehicles furniture electronics and warehouse inventory Consult the PDF document Lot 1 in the Documentation section to view the complete list of goods included in this lot Goods sold individually not by measurement Some quantities may differ An on site inspection is recommended Download the vehicle documents from the Documentation section SALES NOTES An additional deposit of 5 of the hammer price is required to cover any damage to the property during dismantling and to cover the rental fees Should the collection period extend beyond the 30 day deadline the winning bidder will be responsible for the rental fees COLLECTION NOTES Maximum expected collection time from the agreed date 30 days Car registration procedures following the award will be processed at the Effe car registration agency in Faenza To find out the cost please download the Car Registration Price List file from the Documentation section The prices indicated in the Price List are subject to change based on increases in PRA taxes IPT fees revenue stamps MCTC stamp duty payments MCTC fees and are binding only after the invoice has been sent by the Effe agency Abilio cannot currently provide a specific timeframe for completing the paperwork as it may vary depending on the jurisdiction of the court Please note In the case of the sale of movable property registered with the PRA users who intend to export the property abroad for purposes related to the sale are not eligible to participate For further details see the Frequently Asked Questions Registered Movable Property section
Metalworking -
Add to WatchlistAuction 9965Lot 7
Carpentry accessories
Lot consisting of carpentry accessories and tools such as Pallet trucks of various heights Makita hoses Drywall saw and much more Consult the Lot 7 PDF document from the documentation section to view further details and the complete list of goods included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site COLLECTION NOTES maximum time for collection activities to take place from the agreed day 1 day
Metalworking -
Add to Watchlist-20%Auction 9841Lot 3
A C charging machines
TEXA air conditioning recharging machine model K707R RU year of manufacture 2020 1 MACRA AUTOCLIMA air conditioning recharging machine model 80807202 year of manufacture 2012SALES NOTES The award of the lots at the end of the auction is provisional The final award of each item offered for sale will be subject to subsequent authorization from the Judicial Authority The party provisionally awarded one or more items at the end of the auction must send the documentation indicated in the terms of sale to postvendita industrialdiscount com no later than 48 hours after the auction closes COLLECTION NOTES Maximum expected collection time from the agreed upon date 1 day We recommend using the following vehicles for collection van
Metalworking -
Add to WatchlistAuction 9600Lot 16
Dierre die cutter
SALE FROM ACTIVE COMPANYDierre Rubber 1000 DRD 251 die cutting machinePower consumption 6 kWyear 2015
Metalworking -
Add to WatchlistAuction 8897Lot 8
ComImpianti Falcioni charger
ComImpianti Falcioni charger Year 1998Model FM 90 2Voltage 400 VPhases 3 NFrequency 50 HzMax motor power 4 6 AMPWeight 2 200 KG
Metalworking -
Add to WatchlistAuction 8897Lot 7
ComImpianti Falcioni charger
ComImpianti Falcioni charger Year 1998Model FM 90 2Voltage 400 VPhases 3 NFrequency 50 HzMax motor power 4 6 AMPWeight 2 200 KG
Metalworking -
Add to WatchlistAuction 8897Lot 4
Zoppellaro air Handling Unit
Zoppellaro air Handling Unit Year 1998 2002CeModel TA V 14Air flow 21 000 m3 hMotor 4 kWPower 380 3 50 400 3 50
Metalworking -
Add to WatchlistAuction 8897Lot 3
Zoppellaro air Handling Unit
Zoppellaro air Handling Unit Year 1998 2002CeModel TA V 14Air flow 21 000 m3 hMotor 4 kWPower 380 3 50 400 3 50
Metalworking -
Add to WatchlistAuction 8897Lot 2
Zoppellaro air Handling Unit
Zoppellaro air Handling Unit Year 1998 2002CeModel TA V 14Air flow 21 000 m3 hMotor 4 kWPower 380 3 50 400 3 50
Metalworking -
Add to WatchlistAuction 8897Lot 1
Roccheggiani air Handling Unit
Roccheggiani air Handling UnitYear 2007Model CTA 26 10 SPAir flow 21 000 m3 hMotor 5 5 kWPole 4Total CTA mass 1 100 kg
Metalworking -
Add to WatchlistAuction 10001Lot 456
Tool trolley with 280 pieces
SOLD BY AN ACTIVE COMPANYProfessional tool trolley with 280 piece tool set Maximum trolley load 475 kg maximum drawer load 35 kg 7 drawers with centralized lock 5 drawers 525 x 395 x 90 mm 2 drawers 525 x 395 x 132 mm 1 side cabinet with key lock 2 tilting casters 2 braked casters 1 trolley handle Shipping dimensions 830 x 520 x 870 mm 86 kg Assembled dimensions 758 x 456 x 967 mm 77 kg Packaging warehouse handling and truck loading costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 88
FREUTEK SDM0065 Set of 2 3 Point Inside Micrometers
SOLD BY AN ACTIVE COMPANYLot consisting of 5 FREUTEK SDM0065 3 Point Inside Micrometers packaged together A single SDM0065 corresponds to 12 20 x 0 005 mm 3 Point Inside Micrometer Set 2 x 3 Point Inside Micrometers 12 20 mm 16 20 mm Calibration ring with a diameter of 20 mm included Shaft diameter 10 8 mm maximum depth 150 mm Certificate included APPROXIMATE DIMENSIONS OF THE 5 ITEMS PACKED TOGETHER 240 x 850 x 60 mm WEIGHT 25 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 58
FREUTEK SDM0064 Set of 3 3 Point Inside Micrometers
SOLD FROM AN ACTIVE COMPANYLot consisting of 5 FREUTEK SDM0064 3 Point Inside Micrometer Set packaged together A single SDM0064 corresponds to Set of 3 3 Point Inside Micrometers 6 12 x 0 001 mm Set of 3 three point inside micrometers 0 001 mm for measurements from 6 to 12 mm Measurements 6 8 mm 8 10 mm 10 12 mm Two calibration rings included diameters 8 and 10 mm Shaft diameter 5 8 mm maximum depth 100 mm Certificate included APPROXIMATE DIMENSIONS OF THE 5 ITEMS PACKED TOGETHER 240 x 850 x 65 mm WEIGHT 25 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 113
FREUTEK SDM0062 3 point internal micrometer
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0062 Internal Micrometers packaged together A single SDM0062 corresponds to 3 Point Internal Micrometer 30 40 x 0 05 mm Three point micrometer for internal measurements from 30 to 40 mm Diameter 23 5 mm depth up to 100 mm height of measuring points 12 8 mm 30 mm calibration ring included Accuracy 4 m resolution 0 005 mm Certificate included APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 290 x 680 x 80 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and trucking costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 93
FREUTEK SDM0061 3 Point Inside Micrometers
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0061 3 Point Inside Micrometers packaged together A single SDM0061 corresponds to 3 Point Inside Micrometer 25 30 x 0 05 mm Three Point Micrometer for inside measurements from 25 to 30 mm Diameter 17 mm depth up to 85 mm height of measuring points 8 8 mm 25 mm calibration ring included Accuracy 4 m resolution 0 005 mm Certificate included APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 270 x 520 x 40 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 92
FREUTEK SDM0060 3 Point Inside Micrometer
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0060 3 Point Inside Micrometers packaged together A single SDM0060 corresponds to 3 Point Inside Micrometer 20 25 x 0 05 mm Three Point Micrometer for inside measurements from 20 to 25 mm Diameter 17 mm depth up to 85 mm height of measuring points 8 8 mm 20 mm calibration ring included Accuracy 4 m resolution 0 005 mm Certificate included APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 265 x 520 x 40 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 77
FREUTEK SDM0059 3 Point Inside Micrometer
SOLD BY AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0059 3 Point Inside Micrometers packaged together A single SDM0059 corresponds to 3 Point Inside Micrometer 16 20 x 0 05 mm Three point micrometer for inside measurements from 16 to 20 mm Diameter 10 8 mm depth up to 74 mm height of measuring points 6 3 mm 16 mm calibration ring included Accuracy 4 m resolution 0 005 mm Certificate included APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 260 x 520 x 40 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 76
FREUTEK SDM0058 3 Point Inside Micrometer
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0058s packaged together A single SDM0058 corresponds to 3 Point Inside Micrometer 12 16 x 0 05 mm Three point micrometer for inside measurements from 12 to 16 mm Diameter 10 8 mm depth up to 74 mm height of measuring points 6 3 mm 12 mm calibration ring included Accuracy 4 m resolution 0 005 mm Certificate included APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 260 x 520 x 40 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and trucking costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 54
FREUTEK SDM0055 Set of 4 micrometers
SOLD BY AN ACTIVE COMPANYLot consisting of 2 FREUTEK SDM0055 Set of 4 micrometers packaged together A single SDM0055 corresponds to Set of 4 external micrometers 0 100 x 0 001 mm Set of 4 external micrometers 0 100 mm Measurements 0 25 mm 25 50 mm 50 75 mm 75 100 mm Certificate included APPROXIMATE DIMENSIONS OF THE 2 ITEMS PACKED TOGETHER 280 x 260 x 120 mm WEIGHT 6 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and trucking costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 48
FREUTEK SDM0054 Set of 4 micrometers
SOLD BY AN ACTIVE COMPANYLot consisting of 2 FREUTEK SDM0054 Set of 4 micrometers packaged together A single SDM0054 corresponds to Set of 4 centesimal external micrometers 0 100 x 0 01 mm Set of 4 centesimal micrometers for measurements from 0 to 100 mm Measurements 0 25 mm 25 50 mm 50 75 mm 75 100 mm Certificate included APPROXIMATE DIMENSIONS OF THE 2 ITEMS PACKED TOGETHER 280 x 240 x 130 mm WEIGHT 6 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and trucking costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 71
FREUTEK SDM0053 Micrometri esterni
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0053 Outside Micrometers packaged together A single SDM0053 corresponds to Outside Micrometers 100 125 mm x 0 01 mm Professional outside micrometer with a measuring range of 100 125 mm resolution of 0 01 mm The positive spindle lock holds the anvils in place to ensure accurate measurement recording High quality construction combined with ease of use make this analog micrometer particularly suitable for inspection operators workshop technicians repairers and service personnel It comes in a wooden case for storage and transport APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 250 x 800 x 4 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 235
FREUTEK SDM0052 External micrometers
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0052 Outside Micrometers packaged together A single SDM0052 corresponds to Outside Micrometers 75 100 mm x 0 01 Professional outside micrometer with a 75 100 mm range of application 0 01 mm resolution The positive spindle lock holds the anvils in place to ensure accurate measurement recording High quality construction combined with ease of use make this analog micrometer particularly suitable for inspection operators workshop technicians repairers and service personnel It comes in a wooden case for storage and transport APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 260 x 600 x 35 mm WEIGHT 8 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 234
FREUTEK SDM0051 External micrometers
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0051 Outside Micrometers packaged together A single SDM0051 corresponds to Outside Micrometers 50 75 mm x 0 01 mm Professional outside micrometer with a range of 50 75 mm and a resolution of 0 01 mm The positive spindle lock holds the anvils in place to ensure accurate measurement recording High quality construction combined with ease of use makes this type of analog micrometer particularly suitable for inspection operators workshop technicians repairers and service personnel It is supplied in a wooden case for storage and transport APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 235 x 520 x 30 mm WEIGHT 4 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 63
FREUTEK SDM0050 External micrometers
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0050 Outside Micrometers packaged together A single SDM0050 corresponds to Outside Micrometers 25 50 mm x 0 01 mm Professional outside micrometer with a measuring range of 25 50 mm resolution of 0 01 mm The positive spindle lock holds the anvils in place to ensure accurate measurement recording High quality construction combined with ease of use make this analog micrometer particularly suitable for inspection operators workshop technicians repairers and service personnel It comes in a wooden case for storage and transport APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 210 x 480 x 35 mm WEIGHT 4 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 62
FREUTEK SDM0049 External micrometers
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK SDM0049 External Micrometers packaged together A single SDM0049 corresponds to External Micrometers 0 25 mm x 0 01 mm Professional external micrometer with a range of 0 25 mm resolution of 0 01 mm The positive spindle lock holds the anvils in place to ensure accurate measurement recording High quality construction combined with ease of use make this analog micrometer particularly suitable for inspection operators workshop technicians repairers and service personnel It comes in a wooden case for storage and transport APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 170 x 380 x 35 mm WEIGHT 4 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 28
FREUTEK LON0024 Lathe Chucks
SOLD FROM AN ACTIVE COMPANYLot consisting of 4 FREUTEK LON0024 lathe chucks packaged together A single LON0024 corresponds to Four jaw independent lathe chuck 200 mm Chuck diameter 200 mm with 4 independent jaws up to 2100 rpm Bore 70 mm screw distance 112 mm 4 M10 Height 75 mm with jaws 107 5 mm Item dimensions 200 x 200 x 107 5 mm Item weight 15 kg APPROXIMATE DIMENSIONS OF THE 4 ITEMS PACKED TOGETHER 260 x 1040 x 220 mm WEIGHT 60 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and truck loading costs of 10 are expected
Metalworking -
Add to WatchlistAuction 10001Lot 15
FREUTEK LON0020 Sharpening machine for toothed circular saw blades
SOLD FROM AN ACTIVE COMPANYLot consisting of 2 FREUTEK LON0020 Toothed Circular Blade Sharpeners packaged together A single LON0020 corresponds to Toothed Circular Blade Sharpener 60 300 mm Machine designed to sharpen carbide and steel circular blades Thanks to its precise adjustment it can automatically sharpen teeth at an adjustable speed The motor can rotate in 2 directions to sharpen both edges of the blade Sharpening diameters 60 to 300 mm up to 45 teeth per minute Power 550 W Item dimensions 650 x 650 x 1050 mm Item weight 103 kg APPROXIMATE DIMENSIONS OF THE 2 ITEMS PACKED TOGETHER 650 x 1260 x 1130 mm WEIGHT 206 kg Dimensions may vary depending on the type of packaging required the weight and volume of the items Packaging warehouse handling and truck loading costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 285
FREUTEK LON0015 I Electric Thread Tapping Machine
SALE FROM AN ACTIVE COMPANYLot consisting of 2 FREUTEK LON0015 I Electric Thread Tapping Machines packaged together A single LON0015 I corresponds to Electric Thread Tapping Machine with Vertically Moving Arm ISO M12 48 The tapping machine is servo assisted with intelligent torque protection overcoming the traditional limitations of turning drilling or manual tapping Thanks to the advanced mechanical design and the variety of processes using mold casting overall rigidity is high durable and non deformable The high definition touchscreen is simple and intuitive It can perform vertical and horizontal machining on complex and heavy workpieces quickly locating them and processing them precisely Continuous speed change manual or automatic with three different working modes The automatic mode can effectively control the contact depth without using the control button while automatic depth control is ensured by the depth regulator Rapid and repeated positioning tapping speed and high production efficiency Voltage 220 V Power 1200 W Single phase Speed 0 90 200 rpm TAPPING RANGE ISOM12 M14 M16 M18 20 M22 M24 M27 30 M33 M36 M42 M48APPROXIMATE DIMENSIONS OF THE 2 ITEMS PACKED TOGETHER 1000 x 2400 x 290 mm WEIGHT 274 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and trucking costs of 10 apply
Metalworking -
Add to WatchlistAuction 10001Lot 61
FREUTEK LON0019 Electric Benchtop Chamfering Machine
SOLD FROM AN ACTIVE COMPANYLot consisting of 2 FREUTEK LON0019 electric benchtop bevelling machines packaged together A single LON0019 model corresponds to Electric benchtop bevelling machine 2800 rpm Linear benchtop bevelling machine for angles from 15 to 45 Height 0 3 mm power 550 W 2800 rpm Item dimensions 535 x 385 x 300 mm item weight 38 kg APPROXIMATE DIMENSIONS OF THE 2 ITEMS PACKED TOGETHER 450 x 1100 x 300 mm WEIGHT 76 kg Dimensions may vary depending on the type of packaging required weight and volume of the items Packaging warehouse handling and trucking costs of 10 apply
Metalworking