Insulating panels

Warehouse for mechanical processing and ventilation

Lot consisting of material for mechanical fireproof and ventilation processing for systems including Mecap and Ziggiotto fire extinguishers Promastop intumescent sheath threaded bends flanges Goflex insulating sheaths sleeves and more Consult the PDF Lotto 1 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site SALE NOTES Please note that some goods may contain consumables and products subject to expiration In the event of the presence of the latter the successful bidder will be obliged to dispose of the same at the expense of the same Read the specific conditions of sale and collection All costs of removal transport safety cleaning of the places with removal of waste and paints attributable to the bankruptcy accident prevention and not are the sole responsibility of the successful bidder Read the specific conditions of sale and collection It should be noted that the gas cylinders contained in lot 1 must be re tested in order to be used WITHDRAWAL NOTES Maximum withdrawal duration 5 days The lot can be collected after the sale and collection of the vehicles for sale at auction 6008 It should be noted that the assets are located in two different buildings not far from each other The goods are located in the basement with a descent ramp maximum height 280 cm Auction carried out through an asynchronous sale procedure pursuant to art 25 D M 32 2015The offer will be considered valid following the payment of the deposit From the How It Works section consult the Guida Asta Asincrona manual

Metalworking

View lot

09/02/2023

17:30

CET

Auction 7514

Lot 1

Add to Watchlist

Lindner shredder

Lindner twin shaft shredder mod UZ 150 DETAILS Rotor drive with hydraulic gear motors and hydraulic power unit with KW 160 electric motor with two stage pumps plus air oil heat exchangers CE marked identification plate year 1997 cutting area dimensions mm 1 500 x 1 100 approximate dimensions of floor standing machine mm 4 500 x 2 300 plus control unit mm 2 000 x 1 200 weight of machine body alone approx 10 000 kg cutting blades as new thickness 50 mm with 4 beaks without hopper and switchboard It should be noted that there are no relevant documents and that the machine came from a purchase for experimental trials by a company in the waste sector but was never actually put into production

Metalworking

View lot

10/02/2023

15:30

CET

€ 123.975

Auction 7514

Lot 2

Add to Watchlist

Santandrea Shredder

Santandrea Bialbero shredder mod G 10 DETAILS electric drive and control of the anti clogging system with automatic rotor reversal and restart original large loading hopper oil bath gear motor with HP 10 electric motor cutting chamber size mm 540x540 2 beaks 20 mm thick Please note that the lot offered for sale consists of goods that are not CE compliant therefore please refer to the tender specifications and specific conditions of sale

Metalworking

View lot

10/02/2023

15:30

CET

€ 15.390

Auction 7289

Lot 1

Add to Watchlist

Nordson spray booth

Nordson brand spray booth Complete of N 12 automatic guns N 2 manuals N 2 robots for automatic guns complete with booth cleaning pad Cartridge dust suppression filter Barrier of self reading pieces New Sts fire system

Metalworking

View lot

13/02/2023

15:30

CET

€ 45.000

Auction 7174

Lot 12

Add to Watchlist

Tank pre assembly equipment

Lot consisting of equipment for tank pre assembly and label printing Machines to be overhauled The sale includes for example Ultrasonic welding machine for Raima faceplates Rotary table equipment for pre assembling motor bushings Equipment for tube cutting and spring pre assemblyand so on Ref Inventory 71 72 73 74 75 76 77 78 79 80 81 82 83 Consult the PDF Lotto 12 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 5 days The successful bidder is responsible for the disposal of any liquid waste present It should be noted that the molds present inside the presses are not included in the sale therefore it will be the responsibility of the successful bidder to proceed with the disassembly of the same leaving them on site at his own expense

Metalworking

View lot

14/02/2023

11:30

CET

€ 2.160

Auction 7174

Lot 13

Add to Watchlist

System for versioning Cms Plast front panels

System for versioning Cms Plast front panels mod Sintex 2T4 matr 4714 year 2007 Ref Inventory 47 NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day The successful bidder is responsible for the disposal of any liquid waste present It should be noted that the molds present inside the presses are not included in the sale therefore it will be the responsibility of the successful bidder to proceed with the disassembly of the same leaving them on site at his own expense

Metalworking

View lot

14/02/2023

11:30

CET

€ 1.300

Auction 7175

Lot 14

Add to Watchlist

Incomplete appliance assembly lines

Lot consisting of EX ASSEMBLY LINE 1 Pallet conveyor with aluminum structure by Cassioli Manipulators for loading unloading of the Cassioli welding machine 2006 EX ASSEMBLY LINE 2 Pallet conveyor with aluminum structure by Precision Mechanics 2 tippers for moving tanks EX ASSEMBLY LINE 3 Pallet conveyor with aluminum structure by Cassioli Manipulators for loading unloading of the Cassioli welding machine Vibration welding machine by Branson mod m 822L year 2007 Ref Inventory 84 85 86 Lot sold as is Some quantities could not correspond We suggest an inspection on site SALE NOTES It should be noted that the lines are currently dismantled The Expert suggests scrapping NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 3 days The successful bidder is responsible for the disposal of any liquid waste present inside the machinery

Metalworking

View lot

14/02/2023

12:00

CET

€ 4.800

Auction 7175

Lot 15

Add to Watchlist

Appliance assembly line

Lot consisting of ASSEMBLY LINE 4 for stainless steel tank TANK ASSEMBLY SECTOR Pallet conveyor with aluminum structure by Precision Mechanics 2 tippers for moving tanks Overhead conveyor with tub racks COMPLETE WASHING MACHINE ASSEMBLY SECTOR OMG 77 roller shutter conveyor TESTING REPAIR AND STATISTICAL CONTROL SECTOR Friction roller conveyor year 1995 n 14 electronic turrets for functional testing by Aea company year 1995 station for statistical control year 1995 Ref Inventory 87 Lot sold as is Some quantities could not correspond We suggest an inspection on site SALE NOTES It should be noted that the Final Packaging sector is not present The Expert suggests scrapping NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 10 days The successful bidder is responsible for the disposal of any liquid waste present inside the machinery

Metalworking

View lot

14/02/2023

12:00

CET

€ 5.000

Auction 7175

Lot 16

Add to Watchlist

Appliance assembly line

ASSEMBLY LINE 5 PLASTIC TANK PREASSEMBLY AND WELDING SECTOR Pallet conveyor with aluminum structure by Cassioli company year 2006 Manipulators for loading unloading of the Cassioli company in 2006 BRANSON vibration welding machine mod m 822L year 2006 TANKS ASSEMBLY SECTOR Pallet conveyor with steel structure by Precision Mechanics n 2 tippers for movement of tanks COMPLETE WASHING MACHINE ASSEMBLY SECTOR OMG 77 shutter conveyor TESTING REPAIR AND STATISTICAL CONTROL SECTOR Friction roller conveyor year 1995 No 14 electronic turrets for functional testing by AEA 1995 station for static control year 1995 The assembly line is equipped with the following accessories and tools for assembling washing machines about 30 screwdrivers about 20 worktops about 4 belts and craft tools Ref Inventory 88 Lot sold as is Some quantities could not correspond We suggest an inspection on site SALE NOTES It should be noted that the Final Packaging sector is not present It should be noted that the line will need to be revised NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 15 days The successful bidder is responsible for the disposal of any liquid waste present inside the machinery

Metalworking

View lot

14/02/2023

12:00

CET

€ 11.600

Auction 7168

Lot 72

Add to Watchlist

Assembly line for washing machines

Assembly Line for top loading washing machines line 3 TANKS ASSEMBLY SECTOR Pallet conveyor with aluminum structure by ESIMEC N 2 tippers manipulators for moving tanksCOMPLETE WASHING MACHINE ASSEMBLY SECTOR Shutters conveyor company ESIMEC Section with descender Lift for corridor crossingTESTING REPAIR AND STATISTICAL CONTROL SECTOR Friction roller conveyor year 1996 N 14 electronic turrets for functional testing company ASI year 1996 Station for statistical control year 1996FINAL PACKAGING SECTOR Mixed conveyor with shutters and friction rollers Base change equipment year 1996 N 1 equipment for shrink wrapping by OMS N 2 equipment for radius application Lifts descenders plus underground transport for transferring the finished product to the storage warehouse The assembly line is equipped with the following accessories and tools for assembling the washing machine about n 35 screwdrivers about 20 worktops 3 tapes and craft tools ref Inventory 93 NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 15 days

Metalworking

View lot

15/02/2023

12:00

CET

€ 11.000

Auction 7169

Lot 77

Add to Watchlist

Warehouse of spare parts and finished products

Lot composed of raw materials warehouse semi finished products finished products and spare parts such as bearings sheets screws straps polypropylene polystyrene porthole frames pumps with filter power cables thermostats wiring Freggia and Philco washing machinesand so on From the documentation section consult the pdf Lotto 77 auction 7169 to view the complete list of goods belonging to the lotThe sale also includes shelving sheet metal containers small and large mesh baskets plastic crates PVC containers In particular Grilled metal fences ref Inventory 135 N 235 Metal shelving pallet racks of various sizes and capacities ref Inventory 136 N 25 Shelving in prefabricated modular structures H 8000 P 800 with eight shelves for a linear development of about 25 ml positioned in the raw materials warehouse ref Inventory 140 N 10 Shelving in modular prefabricated structures H 4500 D 600 with 8 shelves for a linear development of about 10 ml positioned in rep silk screen printing ref Inventory 143 Approx 300 Sheet metal containers with 4 stackable uprights weight each 120kg ref Inventory 145 About 150 small mesh baskets stackable weight each kg 80 ref Inventory 146 About 100 large mesh baskets stackable weight each kg 100 ref Inventory 147 About 20 large iron containers stackable weight each kg 200 ref Inventory 148 About 200 small plastic boxes ref Inventory 149 About 100 plastic containers of 600lt ref Inventory 150 About 20 Containers of various sizes and characteristics for the storage of materials or processing scraps ref Inventory 151 Lot sold as is Some quantities could not correspond We suggest an inspection on site

Metalworking

View lot

15/02/2023

16:00

CET

€ 292.299

Auction 7166

Lot 40

Add to Watchlist

Manual equipment

Various pre assembled manual equipment basket year 1989 Ref Inventory 51 Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 2 days The successful bidder is responsible for the disposal of any liquid waste present inside the machinery It should be noted that the molds present inside the presses are not included in the sale therefore it will be the responsibility of the successful bidder to proceed with the disassembly of the same leaving them on site at his own expense

Metalworking

View lot

15/02/2023

16:30

CET

€ 4.400

Auction 3783

Lot 2

Add to Watchlist

Electrocompressor mod W2s 200 off Grazia

Electrocompressor mod W2s 200 off Grazia Packaging and loading on request at a cost to be quoted with the sellerProperty owned by a private subject and therefore an operation not carried out in the course of business Operation excluded from the field of application of VAT as it does not fall within the provisions of art 1 of the Presidential Decree 633 72 Transfer with revenue stamp 2 00 The exclusion from the VAT field applies only to subjects resident in Italy

Metalworking

View lot

20/02/2023

16:00

CET

€ 220

Auction 7550

Lot 1

Add to Watchlist

Machinery and equipment for the production of electric capacitors

Bankruptcy no 581 2021 Court of MilanoSale in compliance with art 107 co 1 L F 31 01 2023 it should be noted that today s notice of sale has been amendedSale of machinery equipment and inventories covered by the irrevocable purchase offer already received and received by the Procedure as indicated in the Settlement Program and subsequent supplement Specifically these are machinery equipment and inventories of a bankrupt manufacturer of electric capacitors and low and medium voltage systems Among others we highlight Panasonic TIG welding robot system Metar winders autoclaves for oil treatment cutters shelving pallet trucks and more The auctioned properties are located in Villa d Adda BG and Monza MB It is specified that

Metalworking

View lot

21/02/2023

17:00

CET

Auction 7203

Lot 19

Add to Watchlist

Iron brackets and trestles

Lot consisting of brackets iron trestles profiles iron workbench portions of iron box frame and much more Consult the PDF Lotto 19 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 5 days

Metalworking

View lot

24/02/2023

11:30

CET

€ 20.913

Auction 7460

Lot 2

Add to Watchlist

-25%

CRM Plasma Plant

CRM plasma system model CDTI 60 25 HD with HY Pertherm HD 3070 generator

Metalworking

View lot

24/02/2023

11:30

CET

Auction 7460

Lot 13

Add to Watchlist

-25%

Ferraro welding machine and jib crane

Lot consisting of equipment such as Ferraro welding machine electronic weighing machine various jib cranes Tranf for bevelling and much more Consult the PDF Lotto 13 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site

Metalworking

View lot

24/02/2023

11:30

CET

Auction 7404

Lot 1

Add to Watchlist

Mechanisms for external and internal lift opening and closing

Lot consisting of no 4 mechanisms for opening and closing interior lift doors approximately no 11 suspension mechanisms for opening and closing external doorsLot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

27/02/2023

15:00

CET

€ 422

Auction 7404

Lot 3

Add to Watchlist

Landing door pairs

Lot consisting of approximately 15 pairs of lift landing doors Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

27/02/2023

15:00

CET

€ 1.266

Auction 7404

Lot 4

Add to Watchlist

Lift car components

Lot consisting of elements for no 4 lift cabins components for the construction of a lift car consisting of 8 walls a bottom and a roof Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

27/02/2023

15:00

CET

€ 2.829

Auction 7404

Lot 8

Add to Watchlist

Platform lift arches for lifts

Lot consisting of components for lifting platform arches They show some signs of rust Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

27/02/2023

15:00

CET

€ 169

Auction 7404

Lot 9

Add to Watchlist

Semi automatic doors and door frames for lifts

Lot consisting of approx no 16 semi automatic doors span mm700 handcrafted approx no 11 frames for semi automatic doors fair state of preservation Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

27/02/2023

15:00

CET

€ 3.178

Auction 7404

Lot 11

Add to Watchlist

Switchgear for lifts

No 2 switchboards complete with cabinet NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

27/02/2023

15:00

CET

€ 563

Auction 7489

Lot 2

Add to Watchlist

-25%

Production line for iron coils and straighteners

Lot composed of a complete line for the production of iron coils straighteners and much more Consult the PDF Lotto 2 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 4 days it is recommended to have the following means for collection truck and forklift

Metalworking

View lot

28/02/2023

11:30

CET

€ 1.507

Auction 7530

Lot 24

Add to Watchlist

Forge

Lot consisting of 1 forge

Metalworking

View lot

28/02/2023

15:30

CET

€ 131

Auction 7228

Lot 2

Add to Watchlist

-100%

Metal washing machine

Ama Universal metal washing machine type LM 150 matr 1108 year 1998NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection forklift

Metalworking

View lot

01/03/2023

11:30

CET

€ 100

Auction 7228

Lot 3

Add to Watchlist

-100%

Stator machines and equipment

Lot consisting of machinery and equipment for stators such as lathes winding machines inserting machines strippers winding machines and much more Consult the PDF Lotto 3 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection crane truck

Metalworking

View lot

01/03/2023

11:30

CET

€ 250

Auction 7536

Lot 11

Add to Watchlist

Mechanical machinery and equipment

Lot consisting of equipment and machinery for mechanics fume suction plant miscellaneous spare parts warehouse office furniture and equipment and much more Consult the PDF Lotto 11 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 10 days

Metalworking

View lot

01/03/2023

17:00

CET

Auction 7536

Lot 12

Add to Watchlist

Roll reels

Sheet metal coil reel holder Teap mod MOL P type 35 year 1995 NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day

Metalworking

View lot

01/03/2023

17:00

CET

Auction 7277

Lot 2

Add to Watchlist

Iron shelving and equipment

Lot consisting of a heavy metal shelving work equipment and more The sale includes for example Fini brand compressor Switchboards Iron shelves Motor pumpand so onConsult the PDF Lotto 2 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 3 days

Metalworking

View lot

03/03/2023

11:00

CET

€ 10.000

Auction 7277

Lot 3

Add to Watchlist

Iron shelving and equipment

Lot consisting of a heavy metal shelving work equipment and more The sale includes for example Iron workbenches Generator group Drill press Iron shelf with 2 shelvesand so onConsult the PDF Lotto 3 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 3 days

Metalworking

View lot

03/03/2023

11:00

CET

€ 10.000

Auction 7277

Lot 4

Add to Watchlist

Iron shelving with equipment

Lot consisting of two metal racks work equipment and more The sale includes for example Loft in iron and wood Miller Welders Work bench with vice Metal cabinet with 3 doorsand so onConsult the PDF Lotto 4 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 4 days

Metalworking

View lot

03/03/2023

11:00

CET

€ 15.000

Auction 7277

Lot 5

Add to Watchlist

Equipment

Lot consisting of work equipment shelves and more The sale includes for example Miller welder Supreme balance Double door iron cabinets Tool trolleysand so onConsult the PDF Lotto 5 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 4 days

Metalworking

View lot

03/03/2023

11:00

CET

€ 12.500

Auction 6812

Lot 1

Add to Watchlist

-100%

Material for hardware

PROVISIONAL AWARDLot consisting of hardware materialThe sale includes for example Swivel bench vice Shelving Bolts and fittings Nailer gun Anticorrosive for ironand so onConsult the PDF Lotto 1 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection 2 daysIt should be noted that with regard to the lot some goods may contain consumables and products subject to expiry Consult the specific conditions of sale and collection

Metalworking

View lot

06/03/2023

10:30

CET

€ 500

Auction 7267

Lot 2

Add to Watchlist

Stock of disused equipment and ferrous material

Lot consisting of disused equipment and ferrous material such as calender for metalworking column drill Olivieri hydraulic press punch press and much more Consult the PDF Lotto 2 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 2 days it is recommended to have the following means for collection trailer

Metalworking

View lot

06/03/2023

11:30

CET

€ 2.905

Auction 7267

Lot 4

Add to Watchlist

Machining equipment and accessories

Lot consisting of machining equipment and accessories such as Hobart wire welding machines bench die heads electric drills workbenches sheet metal cutting machinery Atlas compressor mod xas 46 and much more Consult the PDF Lotto 4 document from the documentation section to view the complete list of assets included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 3 days it is recommended to have the following means for collection trailer

Metalworking

View lot

06/03/2023

11:30

CET

€ 11.316

Auction 7327

Lot 10

Add to Watchlist

Warehouse material

Lot consisting of storage material consisting of aluminium steel and other including steel rack and metal shelf Please note that there is no list of goods Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection Pallet truck Truck or van Please note that in order to collect the goods covered by this lot it will be necessary to move the forklift referred to in lot 15 and the vehicles referred to in lots 23 and 24 At the end of the collection operations these goods will have to be repositioned in their initial location This fulfilment shall be the responsibility of the successful tenderer of this lot at his own cost and expense Auction carried out through an asynchronous sale procedure pursuant to art 25 D M 32 2015The offer will be considered valid following the payment of the deposit From the How It Works section consult the Guida Asta Asincrona manual

Metalworking

View lot

09/03/2023

17:00

CET

Auction 7327

Lot 13

Add to Watchlist

OMCA chamfering machine

Bench chamfering machine Brand OMCA Art 590 Serial No 876Year 2012 Including metal work table with two wooden shelves DETAILS The item shows normal signs of wear and tear related to use NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection Pallet truck Truck or van Please note that in order to collect the goods covered by this lot it will be necessary to move the forklift referred to in lot 15 and the vehicles referred to in lots 23 and 24 At the end of the collection operations these goods will have to be repositioned in their initial location This fulfilment shall be the responsibility of the successful tenderer of this lot at his own cost and expense Auction carried out through an asynchronous sale procedure pursuant to art 25 D M 32 2015The offer will be considered valid following the payment of the deposit From the How It Works section consult the Guida Asta Asincrona manual

Metalworking

View lot

09/03/2023

17:00

CET

Auction 7327

Lot 17

Add to Watchlist

Simet and LTF marking instruments

Lot consisting of Bench marking machine brand Simet model PMS V90 HEAD Series No 12a7399 year 2012 Electric pen marking machine brand LTF DETAILS Please note that the front panel of the pen marker is discoloured NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day Please note that in order to collect the goods covered by this lot it will be necessary to move the forklift referred to in lot 15 and the vehicles referred to in lots 23 and 24 At the end of the collection operations these goods will have to be repositioned in their initial location This fulfilment shall be the responsibility of the successful tenderer of this lot at his own cost and expense Auction carried out through an asynchronous sale procedure pursuant to art 25 D M 32 2015The offer will be considered valid following the payment of the deposit From the How It Works section consult the Guida Asta Asincrona manual

Metalworking

View lot

09/03/2023

17:00

CET

Auction 73520

Lot 7

Add to Watchlist