CR Electronic beading
-
Bid placing deadline: 18/04/201912:00CET
-
Auction opens: 19/04/201912:00CET
-
Closing date: Closed 30-08-2018
- Experiment n°6 -100%
-
-
Category:
Other - Brand: CR Electronic
- Year:1996
- No. of visits: 2937
-
Category:
Lot Description
Sale documentation
Lot Details
- Closing date:19-04-2019 16:00:00
- VAT:22%
- Buyers Premium: 10% BP
- Payment: Within 30-04-2019
- Inspection date: Upon appointment
- Payment method: Bank Transfer
- Collection:Within 30 days from the notice of call by email
Location
- Country:IT
Related searches
- Would you like to take a look at all court actions and bankruptcies in Lombardia?
Click on: Lombardia Court Actions - Would you like to take a look at all court actions and bankruptcies in the area of Milano?
Click on: Milano Court Actions
Related products
-
Add to WatchlistAuction 8395Lot 10
Dea Gamma measuring machine
Dea Gamma motorized measuring machineSALE NOTES Please note that the goods offered for sale are non CE compliant goods as required by the relevant EU directives The person who at the end of the auction has been awarded one or more non CE compliant goods will be required to send within and no later than 24 hours from the end of the auction to the address aftersales industrialdiscount com Consult the conditions of sale and collection The successful tenderer will be responsible for any costs of dismantling classification list of parts and components of the machinery purchased as well as any costs of remediation from oils special liquids or other materials which impose specific disposal obligations in addition to the removal of the goods from the place where they are currently located and transport to their destination AUCTION RESERVED FOR HOLDERS OF VAT NUMBERPROVISIONAL AWARD
Metalworking -
Add to WatchlistAuction 8395Lot 12
Yaskawa Motoman Anthropomorphic Robots
No 3 Yaskawa Motoman ES200 ES200 HP20 anthropomorphic robotSALE NOTES Please note that the goods offered for sale are non CE compliant goods as required by the relevant EU directives The person who at the end of the auction has been awarded one or more non CE compliant goods will be required to send within and no later than 24 hours from the end of the auction to the address aftersales industrialdiscount com Consult the conditions of sale and collection The successful tenderer will be responsible for any costs of dismantling classification list of parts and components of the machinery purchased as well as any costs of remediation from oils special liquids or other materials which impose specific disposal obligations in addition to the removal of the goods from the place where they are currently located and transport to their destination AUCTION RESERVED FOR HOLDERS OF VAT NUMBERPROVISIONAL AWARD
Metalworking -
Add to WatchlistAuction 8394Lot 6
Maito Automation System
Complete Maito Automation SystemWe inform you that the goods offered for sale are made up of non CE compliant goods in accordance with the provisions of the relevant community directives At the end of the auction the provisional successful bidder who has won one or more non CE compliant goods will be required to send no later than 48 hours after the end of the auction to the following address aftersales industrialdiscount com Consult the specific conditions of sale and collection AUCTION RESERVED FOR HOLDERS OF VAT NUMBERPROVISIONAL AWARDING
Metalworking -
Add to WatchlistAuction 8316Lot 3
Laser removal machine
Laser removal machine LASERTEC mod DML 40 serial number 11150001637 year 2006 AUCTION RESERVED FOR HOLDERS OF VAT NUMBERPROVISIONAL AWARDING
Metalworking -
Add to Watchlist-36%Auction 8925Lot 2
ASF Metrology measuring machines for testing and design and office furniture
Lot composed of ASF METROLOGY measuring machines for testing and design and office furniture such as desks PCs lamps sofas works of art The lot also includes 2 semi finished car models 1 prototype of a truck that is running but not registrable and 1 car that is running and complete in all its parts but not registrable Consult the Lot 2 PDF document from the documentation section to view further details and the complete list of goods included in this lot Lot sold as is Some quantities could not correspond We suggest an inspection on site SALES NOTES please note that the removal of any lamps sinks and or goods strictly connected to the property must be carried out without causing damage to the property any electrical wires and hydraulic pipes must then be isolated and secured NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 10 days it is recommended to have the following means for collection labory truckAuction carried out through an asynchronous sale procedure pursuant to art 25 D M 32 2015 The offer will be considered valid following the payment of the deposit From the How It Works section consult the Manuale d uso per la vendita asincrona ex art 25 D M 32 2015
Metalworking -
Add to WatchlistAuction 8897Lot 8
ComImpianti Falcioni charger
ComImpianti Falcioni charger Year 1998Model FM 90 2Voltage 400 VPhases 3 NFrequency 50 HzMax motor power 4 6 AMPWeight 2 200 KG
Metalworking -
Add to WatchlistAuction 8897Lot 7
ComImpianti Falcioni charger
ComImpianti Falcioni charger Year 1998Model FM 90 2Voltage 400 VPhases 3 NFrequency 50 HzMax motor power 4 6 AMPWeight 2 200 KG
Metalworking -
Add to WatchlistAuction 8897Lot 4
Zoppellaro air Handling Unit
Zoppellaro air Handling Unit Year 1998 2002CeModel TA V 14Air flow 21 000 m3 hMotor 4 kWPower 380 3 50 400 3 50
Metalworking -
Add to WatchlistAuction 8897Lot 3
Zoppellaro air Handling Unit
Zoppellaro air Handling Unit Year 1998 2002CeModel TA V 14Air flow 21 000 m3 hMotor 4 kWPower 380 3 50 400 3 50
Metalworking -
Add to WatchlistAuction 8897Lot 2
Zoppellaro air Handling Unit
Zoppellaro air Handling Unit Year 1998 2002CeModel TA V 14Air flow 21 000 m3 hMotor 4 kWPower 380 3 50 400 3 50
Metalworking -
Add to WatchlistAuction 8897Lot 1
Roccheggiani air Handling Unit
Roccheggiani air Handling UnitYear 2007Model CTA 26 10 SPAir flow 21 000 m3 hMotor 5 5 kWPole 4Total CTA mass 1 100 kg
Metalworking -
Add to Watchlist-69%Auction 8767Lot 1
Trotec DH145SH Industrial Dehumidifier
Lot consisting of industrial dehumidifier Trotec brand model DH145SH NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day Auction carried out through an asynchronous sale procedure pursuant to art 25 D M 32 2015 The offer will be considered valid following the payment of the deposit From the How It Works section consult the Manuale d uso per la vendita asincrona ex art 25 D M 32 2015
Metalworking -
Add to Watchlist
-
Add to Watchlist
-
Add to WatchlistAuction 9320Lot 1
Photoexposer Gugher screen printing machine professional extractor column drill Pluritec belt packaging machine and cooling unit
SALE FROM AN ACTIVE COMPANYAVAILABLE INDUSTRIAL EQUIPMENT FOR SALE 5 Kw Photoexposer for Dryfilm model HMW 201B 5K brand ORC year 1988 Screen exposer brand Bancolini 8 Kw Photoexposer for solder model HMW680GW brand ORC Static oven model FCNA 130 brand Termotec Screen printing machine model FUTURA 1000 U L DX brand Gugher year 1998 Copper plating galvanic system brand Pesaresi Acid etching system model KT Y 65 brand Hans Hollmuller year 1990 Micro etching machine brand Rescotron Automatic scoring machine model SL 13 10 brand Telmec year 1995 Dryfilm stripping machine model STRIPMASTER brand IS UV oven with 5 lamps model FOR UV 5L 90 brand Gugher year 1990 Red light table Combined micro etching washing module model 600 90 brand Ocleppo 2 5 Kw Photoexposer model HMW 201FW brand ORC year Oct 1988 Manual reference drilling machine model Praktica brand Pluritec Manual scoring machine model SL13 7 brand Telmec year 1992 Belt packaging machine brand Pluritec Static oven model Stf 120 brand Solo year 1979 Manual solder developer and loader year 1998 Two depinners Column drill 2 pcs brand R C Microscope brand Bausch Lomb UV radiometer brand UV Design Spectrophotometer brand Jenway 6305 Light tables 3 units Digital scale Caliper in inches brand Mitutoyo Fischer Scope instrument model SR SCOPE RMP30 S brand Fischer Horizontal unloader brand Pola e Massa Light panels 5 pcs Manual press brand Bieffebi Spa Micrometer Set of 3 calipers brand Meccano Torque wrench brand Beta pH meter brand Hanna Instruments Professional extractor with spare filters model CTL44E brand Festo UV oven with 3 lamps homemade Magnifier viewer brand Vision Mantis ACCUMAX films various formats 406x508 mm 610x762 mm 508x610 mm brand Kodak Light table brand Nuarc pH Conductivity meter brand Hanna Analog micrometer in inches brand Mitutoyo Cavider with calibration resistor brand UPA Cooling unit brand Climaveneta Riibo brand Ribo Static oven brown brand Despatcoh Yellow glass light table Professional extractor brand Festo It is noted that the lots offered for sale consist of equipment not CE compliant as per relevant European directives Therefore such items may only be used within the European Community after being brought into compliance with applicable technical standards following the procedures outlined in the following sections of the documentation Alternatively the equipment may only be used as spare parts which must not be employed in the construction or assembly of new machinery but strictly as replacements for worn out components Under no circumstances may these goods be used prior to compliance except strictly as spare parts
Metalworking -
Add to Watchlist-80%Auction 8760Lot 29
Bodywork molds
Lot consisting of in house designed and manufactured molds for van and bus bodywork in particular Various Ibis MB 616 bus molds 515 bus molds 518 IBIS bus molds MB 815 bus molds 818 NEW LOOK bus molds Magister bus molds Baster bus molds Sold in bulk and not by size some quantities may not match an on site inspection is recommended NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 5 days
Metalworking -
Add to Watchlist-80%Auction 8760Lot 22
Mechanical equipment
Lot consisting of equipment for mechanical processing N 2 manual sheet metal shears id 52 Fixed disc saw for aluminum brand Pedrazzoli mod Perris 350 id 53 Column grinder brand Tommasi Bonetti mod T06 id 55 Column drill brand SermaK mod RAG 25 L id 56 Roller bending machine L16 id 62 Roller bending machine L150 id 63 Air compressor 100 lt id 64 Bench saw mod Special T10 super id 72 Bench saw brand OMS mod 250 special T10 id 73 NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day
Metalworking -
Add to Watchlist-80%Auction 8760Lot 21
Bodywork equipment
Lot consisting of bodywork equipment See PDF document Lot 21 from the documentation section to view further details and the complete list of goods included in this lot Sold as a whole and not by size some quantities may not match an on site inspection is recommended NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day
Metalworking -
Add to Watchlist-80%Auction 8760Lot 10
Wire welders
Lot consisting of no 11 wire welders Continuous wire welder Sincosald brand mod MIG 170 TIM id 40 Continuous wire welder Cemont brand mod MIG 25 id 41 No 5 Continuous wire welders Sincosald brand mod MIG 300 id 42 No 3 continuous wire welders Cemont brand mod MIG 31 id 43 Continuous wire welder Telwin brand mod MIG 220 C id 44 NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day
Metalworking -
Add to Watchlist-80%Auction 8760Lot 8
Mechanical equipment
Lot consisting of equipment for mechanical processing such as Disc cutting machine for aluminum brand Pedrazzoli mod P 350 MRP year 2000 id 28 Cutting torch id 31 n 2 manual shears for sheet metal id 32 Portable electric threading machine Bosch id 33 Manual pipe bender id 35 Felisatti column grinder id 36 Column drill brand Bimak 22FO id 37 Column grinder id 48 Column drill brand Sermak mod RAG 25L id 49 NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day
Metalworking -
Add to WatchlistAuction 9353Lot 1
Medium occupancy rooftop unit Model Rooftop24 RM2 configuration
FOR SALE OPERATING COMPANYMedium occupancy rooftop unit Model Rooftop24 RM2 configuration Manufacturer Warm World San Martino in Rio RE Italy Serial number WMAW1A17021400323 Cooling capacity 24 2 kW Heating capacity 30 kW Airflow rate 3 400 m h Year of installation 2014Autonomous rooftop unit for air conditioning and ventilation in medium occupancy environments Suitable for warehouses industrial buildings or commercial spaces Equipped with compressors fans and coils for complete air treatment Designed for outdoor rooftop installation Bene di propriet di soggetto privato e pertanto operazione non effettuata nell esercizio di impresa Operazione esclusa dal campo di applicazione dell IVA in quanto non rientrante nel disposto dell art 1 del D P R 633 72 Cessione con marca da bollo 2 00 L esclusione dal campo IVA si applica solo ai soggetti residenti in Italia Download the technical data sheet PDF from the lot documentation section
Metalworking -
Add to WatchlistAuction 9165Lot 3
Multihead Weigher SIATE S r l
SALE FROM AN OPERATING COMPANYMultihead WeigherManufacturer SIATE S r l Year of Manufacture 2011 Serial Number 605 Power Supply 220 V Frequency 50 Hz Air Pressure 8 Atm Please note that the lots offered for sale consist of goods that are not CE compliant as defined by the relevant EU directives These items may therefore be used within the European Community only after being brought into compliance with the standards required by the specific applicable regulations in accordance with the procedures described later in this document Alternatively they may be used exclusively as spare parts which must not be used for the construction or assembly of new machinery but only as replacements for worn components in existing equipment Under no circumstances may these goods be used prior to being brought into compliance except strictly as spare parts
Metalworking -
Add to WatchlistAuction 8862Lot 10
MITUTOYO Measuring Instruments
New instrumentation MITUTOYO centesimal comparator cod 2046AB 09 SEB centesimal comparator MITUTOYO DIGIMATIC digital caliper 0 300 mm cod 500 153 30 MITUTOYO digital caliper for internal grooves cod 573 646 20 TESA analog caliper for internal grooves cod 00510393 MITUTOYO analog caliper for grooves cod 536 172 MITUTOYO DIGIMATIC digital micrometer 0 25 mm cod 293 240 30 MITUTOYO DIGIMATIC digital micrometer 25 50 mm cod 293 241 30 MITUTOYO DIGIMATIC digital micrometer 50 75 mm cod 293 242 30 MITUTOYO DIGIMATIC digital micrometer 125 150 mm cod 293 251 30 MITUTOYO DIGIMATIC digital micrometer 150 175 mm cod 293 252 30 MITUTOYO DIGIMATIC double ended digital internal micrometer 25 50 mm cod 345 251 30 TESA centesimal lateral probe cod 01810011 TESA centesimal standard probe cod 01810005 TESA thousandths standard probe cod S18001695 MITUTOYO digital bore gauge 18 150 mm cod 511 925 10 MITUTOYO analog bore gauge 160 250 mm cod 511 715 20 MITUTOYO ABSOLUTE digital altimeter 0 300 mm cod 570 402 RUPAC granite base 635x400x75 MITUTOYO lines L 160 cod 619018 Pair of cross parallels 75x75x50 MITUTOYO micrometer support cod 156 101 10 Magnetic supports 2 HELMUT FISCHER Deltascope MP1C thickness gauge
Metalworking -
Add to WatchlistAuction 8862Lot 11
ESAB Plasma Cutting Machine
Plasma cutting machine brand ESAB mod PCM 1000iSerial number PF J237051 36273Cutting current 15 80APower supply 380 V three phaseComplete with torch
Metalworking -
Add to WatchlistAuction 8862Lot 5
ESAB Welding Wire
No 33 spools of 18 kg of MAG welding wire diameter 1 2 mm AUTROD 12 5 ESAB brand Copper plated wire for MAG welding of non alloy steels with a minimum resistance of 530 MPa and fine grained carbon steels with a yield strength of 420 MPa min It is used with both Ar 20 CO2 or CO2 mixture The mechanical properties listed refer to use with mixture
Metalworking -
Add to WatchlistAuction 9299Lot 5
APM Packaging Machine SASP
SALE FROM ACTIVE COMPANYPackaging machine with cardboard format 700 x 500 mm film length 550 mm
Metalworking -
Add to WatchlistAuction 9299Lot 2
BOSS 542 R Automatic bar loader
SALE FROM ACTIVE COMPANYAutomatic bar loader with max bar diameter 42 mm max bar length 4 m
Metalworking -
Add to WatchlistAuction 9390Lot 19
Electric sweeper KASTER WE 1350
SALE FROM A DEALER OF CONSTRUCTION MACHINERY AND EQUIPMENTKASTER WE 1350 battery powered electric sweeper comfort driving system dust suppression system front nebulizer 48 volt battery pack equipped with electronic charger quick charge never used 0 hours
Metalworking -
Add to WatchlistAuction 9390Lot 16
Jerry can with pump KLAMEL DPK 480 L
SALE FROM A DEALER OF CONSTRUCTION MACHINERY AND EQUIPMENTKLAMEL DPK 480 L Canister with pump capacity 480 litres
Metalworking -
Add to WatchlistAuction 9390Lot 15
Kaster Sweeper Vol 2000
SALE FROM A DEALER OF CONSTRUCTION MACHINERY AND EQUIPMENT Battery powered electric sweeper equipped with 4 side brushes and a central brush comfort cab dust suppression system and quick charger never used 0
Metalworking -
Add to WatchlistAuction 9390Lot 13
Electric strapping machine V 2
SALE FROM A DEALER OF CONSTRUCTION MACHINERY AND EQUIPMENT Automatic electric strapping machine mod v2 with 14 4 volt battery
Metalworking -
Add to WatchlistAuction 9163Lot 1
Baldoni machine tool Bonza manual milling machine press and pantograph
SALE FROM OPERATING COMPANYSale of machinery and equipment belonging to various categories mechanics wood metalworking construction or workshop equipment and food production machinery Details of the items available Baldoni machine tool Ridgid electric bench threading machine OMG84 pantograph mod AL123 Tekna sealing machine mod TK259 year 2000 and Pellizzari circular saw Bonza manual universal drilling milling machine mod Super Condor B6M Omga hydraulic hinge drilling milling machine mod AL125P Tekna spin riveting press mod Rambo Uno TK262 Elektra Beckum bench circular saw mod KGT500 Ostali two cylinder pastry refining machine mod OMB200 Ceccato air compressor mod Drylife 7777 DL30 year 1989 MC Motori motor pump Tirfor TU32 cable winch hoist and various electric cables Borghi Saveri scale Proform treadmill belt width 53 cm RCM battery powered ride on sweeper mod Boxer E year 2001 CE marked 199 working hours batteries replaced OMG machine tool year 1981 No 2 safes Pedrazzoli circular saw Bticino electrical panel Metal tool cabinet Wooden and aluminum doors and windows No 2 filing cabinets No 3 safes Chain mortiser for door processing OM locks Stromag pendulum saw PS45 year 1989 Iron workbench for mechanical constructions OCM PC35 HP plotter printer mod DesignJet 750 Plus Drawing table Wood saw blades Cable winding tool The items for sale may only be used within the European Community after being brought into compliance with applicable standards or used as spare parts Only legal entities with a valid VAT number and qualifying as Professionals purchasing the goods solely for professional use and not for personal use under Legislative Decree 206 2005 will be allowed to participate in the auction Specifically the sale is exclusively addressed to sector related repairers and manufacturers in accordance with the merchandise categories listed
Metalworking -
Add to WatchlistAuction 9281Lot 1
Dmg mori ultrasonic 10 Sauer Ultrasonic Powershrink and 3m lava form
SELLING FROM ACTIVE COMPANY Two milling centers Dmg Mori ultrasonic 10 Suer Ultrasonic Powershrink and 3M Lava Form New milling machines that have never been used suitable for machining will also be added to the sale of the machines of the apparatus Number of Axles 5 Spindle Working Time 23676 hours Machine Operating Time 40269 hours Control Siemens Sinumeric 840D SL Feed length Travel on the X Y Z axes 120 120 200 mm A axis 15 to 120 C axis 360 Nominal data Motor operating mode Speed 36000 40000 rpm Output power 6 kW Torque 1 7 1 3 Nm Voltage 400 420 V Current 10 9 A Frequency 1200 1400 Hz Link Stern Feed speed Feed speed range up to 10 000 mm min Rapid X Y Z 10 m min Primary drive Main spindle USB 40 ULTRASONIC maximum rotational speed 40 000 rpm Maximum milling speed range 40 000 rpm Working table NC table with clamping surface 190 mm Maximum load on the table 5 kg Maximum speed of the rotary axes A B C 150 rpm Tool Tool spindle type HSK 25 Tool magazine 16 positions chain magazine Machine configuration and connection Dimensions length width height with signal lamp 1775 1530 2253 mm Machine weight 1800 kg Power consumption 25 kVA Operating voltage 400 V N PE 50 A Compressed air required 6 bar Average air consumption 20 m hour
Metalworking -
Add to WatchlistAuction 9237Lot 1
Electronic instrumentation
Lot consisting of electronic equipment The sale includes plate dryer manual thermostatic bath UTD defectoscope panametrics epoch 4B omniscan Olympus MX RD TECH UTD defectoscope GE USM GO It should be noted that the goods show signs of wear Lot sold as is Some quantities could not correspond We suggest an inspection on site NOTES FOR COLLECTION maximum time for collection activities to take place from the agreed day 1 day it is recommended to have the following means for collection Engine
Metalworking -
Add to WatchlistAuction 9361Lot 16
FREUTEK STR0002 Roughness tester for internal and external measurements with ABS housing
SELLING FROM ACTIVE COMPANYFREUTEK STR0002 Roughness tester for internal and external measurements with ABS housingRoughness tester for internal and external measurements in an unbreakable ABS case 120 x 46 x 68 mm 3 7V rechargeable lithium battery and 220V charger included Portable roughness tester featuring high accuracy wide range of applications and ease of use Recommended for surface testing of all types of metals and non metals 128 x 64 dpi diamond piezoelectric LCD sensor Memory of 100 groups of measurements Including recovery glass sheet Battery charge indicator USB data output with PC cable and software included Transport dimensions 370mmx310mmx125m Weight 5 kgThere are costs for packaging handling in the warehouse and loading of the goods on trucks equal to 31 00 VAT
Metalworking -
Add to WatchlistAuction 9361Lot 13
FREUTEK LON0015 I ISO M12 48 Thread Arm 360 Swivel
SELLING FROM ACTIVE COMPANYFREUTEK LON0015 I ISO M12 48 Thread Arm 360 SwivelHigh performance tapping machine for holes from M12 to M48 Motorized threading machine adjustable in height with a stroke of 400 mm equipped with a universal head for threading at any angle up to a radius of 1300 mm Controlled with an intuitive touch screen controller it is very easy to program for manual use or to use in automatic mode for perfect threads High strength rigid structure with a net weight of 129 kg Supply voltage 220 V Power consumption 1200 W Speed 0 90 200 rpm ISO connectors included M12 M14 M16 M18 20 M22 M24 M27 30 M33 M36 M42 M48 Transport dimensions 1000mmx1200mmx290m Weight 137 kgThere are costs for packaging handling in the warehouse and loading of goods on trucks of 267 00 VAT
Metalworking -
Add to WatchlistAuction 9361Lot 12
FREUTEK LMM0010 Macchina da taglio laser in fibra 2kW FREUTEK LMM0010 2kW Fiber Laser Cutting Machine
SELLING FROM ACTIVE COMPANYFREUTEK LMM0010 2kW Fiber Laser Cutting MachineRayCus laser source with G5 connector RayTools laser cutting head FSCUT 2000E cooling system and voltage stabilizer fully automated focusing system Working area 1300 x 1300 mm X axis travel 1300 mm Y axis travel 1300 mm Z axis travel 100 mm X Y axis positioning accuracy 0 05 mm m X Y axis repeated positioning accuracy 0 02 mm maximum speed 80 m min maximum acceleration 0 8 G Maximum worktop load 220 kg The machine uses the Raycus fiber laser and the Raytools laser head Maximum cutting thickness with laser power of 2 kW Stainless steel up to 6 mm Carbon steel up to 14 mm Aluminum up to 4 mm Brass up to 4 mm with nitrogen oxygen Due to the real time update of products and technologies the product data and images are for reference only Availability approx 3 monthsTransport dimensions 2985mmx2160mmx2000m Weight 2100 kgThere are costs of packaging warehouse handling and loading of the goods on trucks equal to 2500 00 VAT
Metalworking -
Add to WatchlistAuction 9361Lot 11
FREUTEK NNT0014 Electric stacker 1500 kg 1600mm
SELLING FROM ACTIVE COMPANYFREUTEK NNT0014 Electric stacker 1500 kg 1600mmRated load 1500 kg Load centre distance 500 mm Lifting height 1600 mm Total height when lowered 2080 mm Maximum height after lifting 2080 mm Height of the handle from the ground 1200 mm Wheel pu Drive wheel size 210 80 mm Barbell size 100 55 mm Load wheel size 80 680 mm Total length 2070 mm Total width 800 mm Fork dimensions 60x170x1100mm Turning radius 1600 mm Lifting speed no load full load 0 08 0 1 m s Falling speed full load 0 15 0 12 m s Driving speed full load no load 4 5 5 km h Climbing capacity no load full load 5 15 Lifting motor 2 2 kW Drive motor 1 2 kW Battery 24V 80Ah x1Transport dimensions 780mmx1840mmx2080m Weight 370 kgThere are costs for packaging handling in the warehouse and loading of the goods on trucks equal to 327 00 VAT
Metalworking -
Add to WatchlistAuction 9361Lot 10
FREUTEK SHS0001 Multifunctional sweeper
SELLING FROM ACTIVE COMPANYFREUTEK SHS0001 Multifunctional sweeperMultifunction electric sweeper with a cleaning power of 6500 m2 h With its width of 1260 mm and the diameter of the side brushes of 450 mm it is widely applicable to industrial environments and large sizes High density wear resistant nylon bristles for thorough cleaning Washing and sweeping with suction in one pass thanks to the 30 litre water tank and the 80 litre dirt container Dual disc brake and dual drive design for safe traction control Transport dimensions 1160mmx1670mmx1480m Weight 374 kgThere are costs for packaging handling in the warehouse and loading of the goods on trucks equal to 327 00 VAT
Metalworking -
Add to WatchlistAuction 9361Lot 3
FREUTEK LON0001 Battery powered electric strapping machine
SELLING FROM ACTIVE COMPANYFREUTEK LON0001 Battery powered electric strapping machineBattery powered strapping machine for strapping in various compositions with vibration welding Designed to apply high tensions to the strap it has a maximum tensioning capacity of 2800 N expressly designed for polyester PP or PET strapping Usable strap width from 13 mm to 16 mm thickness 0 5 1 2 mm 3 0Aih12VCD lithium battery Charging time 90 minutes strapping cycles for each refill from 100 to 220 Weight about 3 kg Transport dimensions 450mmX180mmX300mm Weight 7 kgThere are costs for packaging handling in the warehouse and loading of the goods on trucks equal to 31 00 VAT
Metalworking
